DENALI Plug-n-Play CANsmart Controller for Triumph Tiger 1200 and 900 Series – Gen II
Rs.28,500.00
Leverage the adaptability and smart capabilities of your Triumph motorcycle’s CANbus electrical system.
Available!
Brand:Denali
DENALI Plug-n-Play CANsmart Controller for Triumph Tiger 1200 and 900 Series – Gen II
Description:
Harness the flexibility and intelligence of your Triumph motorcycle’s CANbus electrical system to simplify the installation of accessories with the new and improved Denali CANsmart™ Controller GEN II.
The CANsmart™ comes preprogrammed to connect and independently control two sets of Denali 2.0 lights, a SoundBomb horn, and Denali’s B6 auxiliary brake light.
Gen II – Enhanced Features, Power, and Versatility – Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power, and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also introduces two new auxiliary light settings: modulating your auxiliary lights for added conspicuity and setting your left and right side lights to independently cancel when you activate your corresponding turn signal.
Key Features:
- High/Low Sync: Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
- ON/OFF and Dim: Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your original vehicle switches.
- Modulate Lights: Set auxiliary lights to modulate to increase your visibility to other motorists.
- Flash to Pass: Pulse your high beam switch three times to make your auxiliary lights strobe three times fast and get someone’s attention.
- Cancel With Turn Signal: Prevent powerful auxiliary lights from overpowering your signal by canceling the corresponding auxiliary light when you turn your turn signal on.
- Inverse Flashing With Hazards: Flash your auxiliary lights inversely to your hazard lights, increasing visibility during roadside emergencies.
- Plug & Play Horn Installation: Easily connect high-power aftermarket horns like our SoundBomb™ without additional harnesses or relays.
- Strobe with Horn: Automatically strobe your auxiliary lights when you sound your horn, regardless of whether you have the factory horn or SoundBomb™ horn installed.
- Deceleration Activated “Smart Brake” Technology: Activate your auxiliary brake light during deceleration based on real-time vehicle speed, allowing you to adjust sensitivity and minimum speed for activation.
- Flash Pattern Braking: Choose from four different flash patterns for auxiliary brake lights to make them noticeable to motorists behind you.
- Circuit Function Selector: Customize the functions of the four circuits by running any accessory of your choice on any circuit using the CANsmart software.
- Switched Power Source: The CANsmart™ provides a universal “accessory” option, providing clean switched 12V power that turns on and off with your ignition.
- Delay Time Out: Set the accessories on this circuit to have a delayed time out, keeping them powered for up to 30 seconds after turning off your bike.
- On Board Power: The “accessory” circuit option is ideal for powering your GPS, phone, heated gear, or any other electronic device.
Highlights:
- Integrate seamlessly with Triumph’s CANbus system, consolidating all accessories into one intelligent controller and wiring harness.
- Plug-and-play installation for easy setup.
- Four circuits are preprogrammed to connect and independently control two sets of Denali lights, a SoundBomb horn, and Denali’s B6 auxiliary brake light.
What’s in the box?
- Denali Plug-n-Play CANsmart Controller for Triumph Tiger 1200 and 900 Series – Gen II x 1 Kit
- Kit includes the following:
- CANsmart™ Controller x 1
- 5.5ft Light Extension Cables x 2
- 5ft SoundBomb Horn Extension Cable x 1
- B6 Brake Light Wiring Adapter x 1
- CAN bus Connection Splitter Cable x 1
- Zip-ties
- Adhesive Hook-and-Loop Fastener
- Micro USB Programming Cable
- Installation instructions
| HSN code |
|---|
Be the first to review “DENALI Plug-n-Play CANsmart Controller for Triumph Tiger 1200 and 900 Series – Gen II”
You must be logged in to post a review.
Shipping:
Products will be dispatched within 2 working days after receiving order.
Standard delivery time once dispatched is 3-10 days based on your location. Subject to change as per courier partner.
We use the best courier services but there might be delay in the transit by the shipping company which is not in our control. Order cancellation will not be accepted incase of delay in delivery.
Exchange/Returns:
Exchange/Returns will be accepted if request is raised within 2 days from the date of delivery of the product provided it satisfies our Exchange/Returns Policy.
DO NOT REMOVE TAGS OR STICKERS FROM THE PRODUCTS ELSE RETURN/EXCHANGE WILL NOT BE ACCEPTED UNDER ANY CIRCUMSTANCES.
Following items are not allowed for returns.
- Accessories & Merchandise
- Items Marked “Non-Returnable” (clearly indicated on the product page before placing your order)
- Items sold on Sale or Discounts
- Innerwear
- Special/Pre-ordered ordered items
- Customized Items
Warranty:
All the products sold on our website are genuine. Standard warranty as promised by brands is applicable. Kindly check Additional Information tab for warranty information for the product. To confirm the final warranty period & other terms and conditions kindly get in touch with the respective brand of the product.
Custom Elements helps by facilitating the warranty but the final call on acceptance of the claims is at the sole discretion of the brand or it's official representative. Custom Elements take no responsibility for the rejected claims. The items on stock clearance are not applicable for warranty.
Reviews
There are no reviews yet.